DEFINITION: Adhesive mortar, that is used for adhere faience and ceramic, easy to prepare and have high stability, basis on cement

USING AREAS: It can be used on, external and internal areas, to adhere the covering materials such as ceramic, faience, glass mosaic etc. on wet floors, cementbasis surfaces such as bathroom, kitchen, swimming pools, water tanks, terrace and balconies,

APPLICATION: The application surface has to be prepared by controlling the application surface whether, in good condition, cleaned and balanced. Mix 25 kg. Ceramic and Faience Adhesive with 6.5-71t water in a container with a low speed mixer until a homogenous
mixture without lumps is obtained. This mixture has to be left tor settlement approximately for 5 minutes and by mixing again the mixture gets ready for using. Prepared mortar, is pulled to the surface by using comb then after faience and ceramics are spreaded by Using rubber mallet

TECHNICAL SPECIFICATION:

Ingredients: Cement that includes Mineral fillings and synthtetic additives.<htz
Mixing Ratio: 25 kg. Ceramic and Faience Adhesive, 6.5-7It water.
Ground Temparature: +5 °C / +25 °C
Working Period: 120 minutes
Open Time: 30 minutes
Adhesive Power: 12 N / mm2(28 days)
Slipping: No
Joint Filling Time: 48 hours later

SURFACE PREPARATION AND SUGGESTION:
Application surface has to be purified from the holding on preventing materials such as dust, painting, dirt
The surface has to be moistured before application.
Prepared mixture has to be consumed in 2 hours.
As it is a cement basis material, the hands needs to be protected. Gloves have to be used

COLOR: Gray

CONSUMPTION: 4,5-5Kg/m2

PACKAGING AND STORAGE: Shelf life is 10 months in 25 kg kraft bags stored in dry and cool place

Note: The data given above have been calculated in Quality Control Laboratory with 0.5% accuracy under standard conditions. Please apply to our technical department for detailed information.